Contemporary
design and
impressive
heat output

The Focus 320 burns with a unique flame that is utterly mesmerizing and the contemporary style door offers the largest viewing space possible. The Focus 320 produces enough heat for the average house, burns overnight, and has low emissions. In addition, the RSF Central Heating Options are compatible, which allows the heat to be spread uniformly throughout the home.

This fireplace is certified for use with 7" ICC Model EXCEL chimney only.

  • Large 2.6 cubic foot firebox.
  • EPA 2015 certified at an emission rate of 4.5gr/hours
  • Molded firebrick lining.
  • Mobile home approved.
  • Takes 22” logs.
  • Can be installed into a masonry chimney using an RSF adapter and a UL/ULC listed stainless steel chimney liner.
  • Can be connected to a central heating system.

The RSF Comfort Advantage

Comfort is our specialty. We customize heat distribution from a wood fireplace throughout the home, including the basement. When the household temperature is tailored for a family at minimal cost and maximum efficiency, we call that the RSF Comfort Advantage.

Note: the central heating option is not available for the Pearl, the Focus 250 or Focus ST.  

1 / 4

Focus 320 - Contemporary design and impressive heat output

Available Options

Clean Face FO-F2 + FO-V2
The Clean Face Kit is required on all complete clean-face installations. It consists of blocking plates that cover the grill openings and an air intake duct that brings air circulating in the home into the fireplace. Gravity vents are required in combinat
Download
Focus 320 Decorative Surround 60”
The Decorative Surround is an option that can be mounted to the facing of the Focus 320 Fireplace to offer a stylish, linear look.
Download
Gravity Vent Kit
The gravity vent kit uses natural convection to distribute the heat generated by the fireplace to the same floor and/or floors above the fireplace
Download
Gravity Vent Kit - Rectangular
The gravity vent kit uses natural convection to distribute the heat generated by the fireplace to the same floor and/or floors above the fireplace.
Inline Fan
Where additional air flow and heat output are desired, the Inline Fan is to be used in combination with the Intake Duct option (FO-CID, when available) or the Clean Face option (when available).
Download
Internal Blower
The internal blower kit will increase the circulation of heated air in the room where the fireplace is installed.
Download
Central Heat Blower Kit
The central heat blower kit enables the distribution of heat generated by the fireplace throughout many rooms and different floors using either dedicated ducts or the house central heating ducts.
Download
Central Heating Tee
This Tee allows you to have two Gravity Vents (FO-V2) on your fireplace and still be able to install the Central Heat option (FO-FDHB6-1).
Download
Heat Dump
The Heat Dump Kit contains all the parts necessary to circulate a moderate amount of heat from your fireplace to another room with a small fan.
Download
Rock Retainer Kit (Focus 320)
This rock retainer kit will allow you to finish your Focus320 fireplace with thin non-supporting facing such as tiles.
Download
Masonry Chimney Adapter
This adapter will attach to the liner with 3 stainless steel rivets (provided) and to the EXCEL chimney with 3 screws (provided).

Technical specs

General Specifications

Outside Dimensions

45"W X 44 1/4"H X 24"D

Shipping weight

562 lb

Firewood Length

22"

Firebox Size

2.6 cubic feet

Chimney

7" Excel

Door Finish

Black

Outside Air

4", meets R2000

Mobile Home Approved

YES

Performance

BTU Output Range

10,000 to 50,000

Heating Capacity

1,000 to 2,000 ft2

EPA Certification

note

Optimal Efficiency

77%